Rail-mount models from the industrial injector families — the form factor that clicks onto the same DIN rail as the cabinet's breakers, supplies and controllers.
Open any industrial control cabinet and the grammar is consistent: everything — protection, power supplies, controllers, terminals — hangs on DIN rail, because rail mounting is how cabinets stay serviceable. A PoE injector destined for that cabinet should speak the same grammar. This page gathers the industrial injector family — fifteen documented models — through the cabinet-builder's lens: hardened units with wide-range DC input, sized for rail-adjacent installation alongside the cabinet's own power system, feeding the cabinet's cameras, radios and sensors.
Two honesty notes belong on this page. First, mounting: industrial models in this catalogue are built for cabinet installation, and the exact mounting arrangement (integrated rail clip vs bracket) is a per-model confirmation — it is asked and answered in the quotation, not assumed from a photograph. Second, the family's rail credentials are real: among the fifteen sits an EN50155-marked injector with M12 connector, the railway standard's answer to vibration and environment — a reminder that 'industrial' in this family is specified, not decorative.
| Model (official product name) | Series | Documentation |
|---|---|---|
| 12-48V Input Industrial 10G 30W PoE+ Injector | — | Full specification confirmed per model at quotation |
| 12-48V Input Industrial 2.5G 30W PoE+ Injector | LNK-INJ401-30 | Specification captured from the official product page |
| 12-48V Input Industrial 5G 30W PoE+ Injector | — | Full specification confirmed per model at quotation |
| 12~48VDC Power Input Industrial 10G 60W PoE Injector | — | Full specification confirmed per model at quotation |
| 12~48VDC Power Input Industrial 2-Port Gigabit PoE+ Injector | — | Full specification confirmed per model at quotation |
| 12~48VDC Power Input Industrial 2.5G 60W PoE Injector | — | Full specification confirmed per model at quotation |
| 12~48VDC Power Input Industrial 5G 60W PoE Injector | — | Full specification confirmed per model at quotation |
| 12~48VDC Power Input Industrial Gigabit 60W PoE Injector | — | Full specification confirmed per model at quotation |
| 80~320VDC Power Input Industrial Gigabit PoE+ Injector | — | Full specification confirmed per model at quotation |
| EN50155 Industrial 1-port 1.25G 2.5G 5G 10G PoE Injector with M12 Connector IEEE802.3at/bt | — | Full specification confirmed per model at quotation |
| Industrial 10G 95W 802.3bt PoE++ Injector (12~48VDC) | — | Full specification confirmed per model at quotation |
| Industrial 2.5G 95W 802.3bt PoE++ Injector (12~48VDC) | — | Full specification confirmed per model at quotation |
| Industrial 5G 95W 802.3bt PoE++ Injector (12~48VDC) | — | Full specification confirmed per model at quotation |
| Industrial Gigabit 100W 802.3bt PoE++ Injector (12~48VDC) | — | Full specification confirmed per model at quotation |
| Industrial Gigabit 95W 802.3bt PoE++ Injector (12~48VDC) | — | Full specification confirmed per model at quotation |
The Industrial PoE Injector family (15 models): the rail-mount candidates for cabinet builds. Mounting format per model is confirmed in the quotation — see the specifying notes.
The injector is a load on the cabinet's DC supply and a source for its device. List: supply voltage and window, the powered device and its class, and the cabinet's other loads. The family's input windows (12-48V typical, one 80~320VDC variant) then select the model — in that order.
State 'DIN-rail mounting required' in the inquiry and it becomes a written confirmation item for the exact model, along with connector type (RJ45 vs M12 on the rail model). Cabinet builds fail on brackets and connectors, not on electronics.
A 90W bt injector in a sealed cabinet is a heat source among heat sources. Cabinet thermal design is the builder's discipline; flag sealed/high-ambient cabinets in the inquiry so the model choice accounts for it.
The family is the industrial (cabinet) line; the exact mounting of each model is confirmed per model in the quotation, as this page states. If rail mounting is a hard requirement, say so — it becomes a selection filter, not a hope.
M12 connectors lock against vibration, which is why rail standards prefer them. If your cabinet is static, RJ45 models are the economical default; if it moves (rail, vehicle), the M12 model exists for you.
One injector, one powered link. Multiple devices mean multiple injectors (racked on the same rail — the form factor anticipates rows of them) or a PoE switch. The cabinet layout in your inquiry gets the count right.
Send the model name, the distance, the fiber type and the quantity. We will confirm the matching transmitter/receiver pairing, the optical module and the full specification of the exact model in writing before you pay.